burlbark (November 30, 1999 at 12:00 am)

@73amxman Yeah you can remove the plastic and then use a volt meter to check which cells are under the -2.2 volt?- threshold and charge just those cells with ac adapter putting out roughly 4 volts and 400 milliamps. You just need to get the voltage up on the weak cells and then pop it on the charger again. I brought all my dead packs back this way. I dont let them sit around almost dead anymore top them off at the end of the workday.

SmoothlyLethal (November 30, 1999 at 12:00 am)

that is really good assembly

Altair8801 (November 30, 1999 at 12:00 am)

Wow! That's very professional! Very well done! I don't think battery manufacturers will mind.

73amxman (November 30, 1999 at 12:00 am)

Hi I have 6 dewalt 36 volt batteries that have died. By that I mean there is something defective about them and they no longer will charge. Is there a way to check a cell to see which ones are bad. I would like to take apart the battery identify the bad cell or cells and replace it with good ones from another battery. Even if I only end up with 2 or 3 good batteries that would be fine for me. They run 160 a piece through lowes and home depot.

killacycle (November 30, 1999 at 12:00 am)

Not recommended to solder on the terminals. It overheats the internals on the cell.

meyiyiyi55 (November 30, 1999 at 12:00 am)

very good video.thanks.

sandallssandalls (November 30, 1999 at 12:00 am)

My Channel

dmgcat (November 30, 1999 at 12:00 am)

Look, everything in life is at your own risk and discretion. Intelligence must be applied. It's also dangerous to invest your life savings in the stockmarket but people still do it....If you don't understand something then simply look it up.

DanFrederiksen (November 30, 1999 at 12:00 am)

use plenty ventilation. don't breathe the fumes. stuff will kill you. classic human mistake

43Wyattlong (November 30, 1999 at 12:00 am)

nice were did u git he shrink wrap