|
skateGOD98 (November 30, 1999 at 12:00 am)
does this charger make it charge faster
nathangroulx (November 30, 1999 at 12:00 am)
what is the black white and yellow wires for? that comes in the kit not showing in this video thou
AntoBoesi (November 30, 1999 at 12:00 am)
hey can you charge using servo connectors? is the small slit in the shape of a servo for that?
hayabusafmw (November 30, 1999 at 12:00 am)
OK STOP YELLING AT ME IM JUST STARTING!!! :P joking;)
lestertarranza (November 30, 1999 at 12:00 am)
Does this charger have a discharger so it could actually discharge the two healthy cells with higher voltage upto the level of the voltage of the bad cell so then it could start start charging on a balanced state? If it does not have it what hyperion charger model does that? Thanks!
mytt600 (November 30, 1999 at 12:00 am)
ok, can i charge 2 2 cell lipo packs(total 4 cells) at the same time? and i also have some lipo packs thet just have the jst connector on them and no balance leads, can i charge these also?
lipomine (November 30, 1999 at 12:00 am)
@Bornindafire remember,always to be safe,charge at a 1c rate so having said this,divide 5000 by 1000=5 so in youre case 5amp or even if you want 4 amp is also good it will take a little longer.
lipomine (November 30, 1999 at 12:00 am)
@RCarfans Easy,just follow what the manuel tells you,press the battery type button,till the screen says lipo,press enter,put in the proper mah for youre battery(3200 MAH) IT will increase by 50 every time you press the inc button do this till it reaches youre 3200 then press enter.Then you will have to do the same for youre cell count, in youre case (3s). hopefully this will help u out.oh and charge at a 1c rate which is 3.2 amps.
lipomine (November 30, 1999 at 12:00 am)
@lipomine Ok heres what the charger is rated for,lipo:1s-6s(3.7-22.2v ,life po4:1s-6s(3.3-19.8v) nicd/nimh:1-14 cells lead acid:1-6 cells.Hopefully this info will help you out. |